|
|
PRS
|
Precision Reference Standard: An economical calibration standard for surface analyzing equipment.
Ra values 119.5 and 16.1; includes Certficate of Conformance
|
$180.00
|
|
|
PRS-C
|
Precision Reference Standard: calibration standard for surface analyzing equipment. Ra values 119.5 and 16.1; includes
calibration traceable to N.l.S.T.
|
$556.00
|
|
|
S-22
|
Conventional Machining Microfinish Comparator: Twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled- ranging from 2 to 500 microinches.
|
$110.00
|
|
|
S-22C
|
Conventional Machining Microfinish Comparator:
Same as S-22 above, includes
calibration traceable to N.l.S.T
|
$365.00
|
|
|
G-60
|
Conventional Machining Microfinish Comparator: Twelve replicated machined surface finish specimens with examples of five different machining processes: lapped, ground, profiled, shape-turned and milled- ranging from 4 to 125 microinches.
|
$110.00
|
|
|
G-61
|
Conventional Machining Microfinish Comparator: Twelve replicated machined surface finish specimens with examples of four different machining processes: Shape-turn, ground, profiled and milled- ranging from 250 to 2000 microinches.
|
$110.00
|
|
|
G-62
|
Cylindrical Ground Microfinish Comparator: Ten replicated ground surface finish specimens: Five shown as inside diameter (I. D.) and five shown as outside diameter (O.D.) - both with a range of 4 to 63 microinches.
|
$110.00
|
|
|
G-63
|
Cylindrical Turned Microfinish Comparator: Ten replicated turned surface finish specimens: Five shown as inside diameter (I. D.) and five shown as outside diameter (O.D.)- both with a range of 16 to 250 microinches.
|
$110.00
|
|
|
C-9
|
Cast Microfinish Comparator: Nine replicated cast surface finish specimens ranging from 20 to 900 microinches.
|
$110.00
|
|
|
E-9
|
Electrical Discharge Machined Microfinish Comparator (EDM):
Nine replicated EDM surface finish specimens ranging from 16 to 250 microinches.
|
$75.00
|
|
|
G-6
|
Grit-Blast Microfinish Comparator: Six replicated grit-blasted surface finish specimens ranging from 32 to 1000 microinches.
|
$75.00
|
|
|
SH-6
|
Shot-Blast Microfinish Comparator: Six replicated shot-blasted surface finish specimens ranging from 32 to 1000 microinches.
|
$75.00
|
|
|
M-15 Set
|
Master Visual-Tactual Set: Eight individual blocks with fifteen replicated machined surface finish specimens ranging from 2 to 125 microinches.
|
$275.00
|
|
G-4 Kit
|
Gar Pak Kit: Contains four individual roughness scales that include replicated surface finish specimens of machined (S-22), grit-blasted (8-6), shot-blasted (SH-6) and electrical discharge machined (EDM) (E-9) surfaces.
|
$240.00
|
